28KHz Digital Ultrasonic Cleaner 15L Sus304/316 Tank With Cooling
System
Company composition
Our R&D department can be divided into five sections:mechical
structure design section,electronic design section,software
developing section,graphic design section,testing section.All
menbers are excellent engeineers who have at least 5 years' R&D
experence.They are good at introducing most advanced technologies
in the world in the world into products and make some innovative
improvement.
About an order :
- there is no MOQ in our factory.
- Could customized the model for you.
- 1year warranty.
- engineer's technology support
- heating and power adjustable
Advantage:
Ultrasonic is widely used throughout industries to remove difficult
contaminants from the parts during or after manufacturing process
which might require a stage of cleaning before the next process. In
general, if an item can be cleaned with liquid, it can be cleaned
much faster and more thoroughly with an ultrasonic cleaner.
Compared with traditional solvent/scrubbing, our ultrasonic
cleaners:
- Are more effective at removing contaminants;
- Are quicker to get a good cleaning effect;
- Save labor time of employees (and subsequent labor cost);
- can heat the cleaning solutions to a suitable cleaning temperature
so as to enhance the cleaning efficiency;
- Have a digital controller of high-precision and a long
service-life;· Are of high performance;
- reduce chemicals in the cleaned stuffs;· Are environment friendly
because of its recyclabilit
Product detail
As you can see,This machine is make of seven button which include
degass,heating and timing.Basket are free ,and you can see that the
details are perfect,such as handel ,anti-slip feed ect.
Application
Industrial ultrasonic cleaner are suitable to clean irregular and
complex specialized instruments,components and PCBs of sundry
shops,workshops,factories etc.
Efficacy:
Specification
| Model: | DK-3000D |
| Tank Size(mm): | 330*300*150 |
| Overall Size(mm): | 360*330*330 |
| Capacity: | 15L |
| Frequency(KHz): | 28 or 40 |
| Ultrasonic Power(W): | 360 |
| Heating Capacity(W): | 400 |
| Timing Range(min:secs): | 1~99 |
| Temperature Range(℃) | 0~80 |
| Water Drainage | Yes |
Plug
Havemany kind of plug,such as:UL,SAA,VDE,JAPAN OLUGE,SABS,THE UK
PLUGE .
Certifications
All Dekang’s standard products have achieved most international
standards, such as CE certification, RoHS certification, FCC
certification etc. Besides, all no-standard products also can
satisfy all requirements of these most international standards.So
you could trust us,we will do our best for you!
How to use?
1. Fill the stainless steel tank with cleaning solution; Plug the
power lead into grounded outlet; After power-on, the temperature
displays the actual environmental temperature, LED displays 3
minutes (default ultrasonic time).
2. Time setting: Press the “TIME-/TIME+ ”shortly at a time means time increase/reduce 1min at a time, press and hold means time will
increase/reduce by 10mins continuously. The cleaning stops when the timer counts down
to 00:00. If the unit needs to be stopped before the timer runs up, press
“Ultrasonic” button.
NOTE: Do not run the cleaner continuously for more than one hour
3.Temperature setting: Press “temperature-/temperature+”shortly at a time means time increase or reduce 1℃ at a time, press
and hold there means time will increase or decrease by 10℃ .
Usually, the best cleaning temperature is within 40℃ to 60℃.
4. After time and heat setting, press “Heating” or “ultrasonic”
button to start both function. Press “Heating” button again, the
heating function will stop. The same for Ultrasonic Function.
5. Degas mode: work intermittently,i.e., 6s “ON” + 2s “OFF” working mode.
It can clean items deeply and efficiently.
6. Drain: press the “drain” button to open or close the automatic valve.
The automatic valve will close a certain time (10 minutes in
default) later after drain.
7. Empty the tank and clean both the outside and inside of the cleaner
with a clean and dry cloth for next use.
NOTE: Do not pour water out until it’s cooling, Hot water will hurt
you and damage the machine itself.
FAQ
Q1. Are you a factory of trading company?
We are professional manufacturer.We are warmly welcome clients from
worldwide to visit our factory and cooperation with us.
Q2.Can I get some samples?
Yes,we are honored to offer you samples of most products.
Q3. Can we print our own brand for the fixtures ?
Of course.We are pleased to be your OEM manufacturer and meet your
OEM requirements
Q4. What’s the Payment?
T/T would be better with quick transfer and few bank fees. You can
also use Western Union and Paypal,Alipay also valid here.
Q5. What certifications does the product get?
CE,RoHS,FCC&ISO9001.Other certification could be made if you
pay for it!
Q6, What is the guarantee period?
1 year,our engineer technology support will be always here!
