1.3 Liter Mini Dental Lab Steam Ultrasonic Cleaner with Heater and
Timer
What is Ultrasonic Cleaning?
Ultrasonic cleaning uses ultrasonic energy in an immersion cleaning tank to assist in
the removal of tenacious or stubborn soils from parts. An
ultrasonic system always consists of at least three main
components:
1. A tank to hold the cleaning fluid and the dirty parts
2. A generator to transform the line voltage into an ultrasonic
signal
3. Transducers to convert the ultrasonic electrical signal into
mechanical energy
How does Ultrasonic Cleaning Work?
An ultrasonic system works by inducing controlled cavitation in the
cleaning fluid. Cavitation refers to microscopic voids or "bubbles"
that form when the transducers emit sufficient ultrasonic energy
into the fluid. The cavitation bubbles form relatively slowly and
then collapse suddenly, releasing tremendous energy against the
surfaces of objects immersed in the tank that ‘scrubs’ hard to
remove soils from the parts.
How to select an ultrasonic cleaner ?
1.Tank size of ultrasonic cleaner
Before selecting ultrasonic cleaner, you need to know the size of
the parts being cleaned .
Measure the dimensions of largest parts to be cleaned (or number of
flasks or beakers to be processed) and make sure to select a tank
that will accommodate them.
2.What will you do with ultrasonic cleaner ?
Ultrasonic cleaners do a lot more than clean parts such as gears,
carburetors, PCB boards and surgical instruments. In the lab they
are broadly employed to degas solvents, disperse nanoparticles, and
emulsify, dissolve, disperse and otherwise prepare lab samples.
3.Add Baskets to your Spec Sheet
Baskets support parts and sample containers in an ultrasonic
cleaner. They affect cleaning and sample processing efficiency and,
importantly, protect tanks from damage.
Baskets with insulated handles facilitate placing and removing
parts being cleaned in hot liquid. They also keep parts, flasks and
beakers off the tank bottom where they suppress vibration and lower
cleaning effectiveness.
A professional ultrasonic cleaner supplier
Shenzhen DeKang Electronic Cleaning Appliances Co., Limited is a
comprehensive new high-tech enterprise which focuses on the
research & development, production and sale of household,
commercial, laboratorial, industrial high-power ultrasonic cleaners
etc. Especially, we also can customize non-standard products
according to customers' requirements.
Our R&D department can be divided into five sections:
mechanical structure design section, electronic design section,
software developing section, graphic design section, testing
section. All members are excellent engineers who have at least 5
years' R&D experience. They are good at introducing most
advanced technologies in the world into our products and make some
innovative improvement.
Now our products are composed of household ultrasonic cleaners,
multifunctional sweep ultrasonic cleaner, power adjustable
ultrasonic cleaner, smart dual-bands ultrasonic cleaner, digital
ultrasonic cleaner, mechanical ultrasonic cleaner, industrial
ultrasonic cleaners, submersible ultrasonic transducers etc. All of
our standard products have achieved most international standards,
such as CE certificate, ROHS certificate, FCC certification etc.
Besides, DeKang also have strict examining procedures for
controling the quality of non-standard products.
Digital ultrasonic cleaner features
. Die casting stainless steel tank
. Industrial grade integrated circuit
. 0-80ºC temperature range
.1-99 minutes working time
. Degassing and degreasing function
. 28KHz for gross rinse or 40KHz for intensive rinse
. Auto stand-by, sleep, and wake-up by one key-press mode
. Digital controller of high-precision and a long service-life
Advantage:
Ultrasonic is widely used throughout industries to remove difficult
contaminants from the parts during or after manufacturing process
which might require a stage of cleaning before the next process. In
general, if an item can be cleaned with liquid, it can be cleaned
much faster and more thoroughly with an ultrasonic cleaner.
Compared with traditional solvent/scrubbing, our ultrasonic
cleaners:
- Are more effective at removing contaminants;
- Are quicker to get a good cleaning effect;
- Save labor time of employees (and subsequent labor cost);
- can heat the cleaning solutions to a suitable cleaning temperature
so as to enhance the cleaning efficiency;
- Have a digital controller of high-precision and a long
service-life;· Are of high performance;
- reduce chemicals in the cleaned stuffs;· Are environment friendly
because of its recyclability
Application
Industrial ultrasonic cleaner are suitable to clean irregular and
complex specialized instruments , components and PCBs of sundry
shops, workshops, factories etc.
Specification
| Model No. | DK-130D |
| Size of Tank: | 150*140*65mm |
| Overall Size: | 190*170*195mm |
| Volume: | 1.3L |
| Frequency: | 28/40 |
| Ultrasonic Power: | 60W |
| Heating Capacity: | 100W |
| Timing: | 1-99min |
| Temp: | 0-80ºC |
| Water Drainage: | Yes |
How to use DeKang ultrasonic cleaner ?
1. Fill the stainless steel tank with cleaning solution; Plug the
power lead into grounded outlet; After power-on, the temperature
displays the actual environmental temperature, LED displays 3
minutes (default ultrasonic time).
2. Time setting: Press the “TIME-/TIME+ ”shortly at a time means time increase/reduce 1min at a time, press and hold means time will
increase/reduce by 10mins continuously. The cleaning stops when the timer counts down
to 00:00. If the unit needs to be stopped before the timer runs up, press
“Ultrasonic” button.
NOTE: Do not run the cleaner continuously for more than one hour
3.Temperature setting: Press “temperature-/temperature+”shortly at a time means time increase or reduce 1℃ at a time, press
and hold there means time will increase or decrease by 10℃ .
Usually, the best cleaning temperature is within 40℃ to 60℃.
4. After time and heat setting, press “Heating” or “ultrasonic”
button to start both function. Press “Heating” button again, the
heating function will stop. The same for Ultrasonic Function.
5. Degas mode: work intermittently,i.e., 6s “ON” + 2s “OFF” working mode.
It can clean items deeply and efficiently.
6. Drain: press the “drain” button to open or close the automatic valve.
The automatic valve will close a certain time (10 minutes in
default) later after drain.
7. Empty the tank and clean both the outside and inside of the cleaner
with a clean and dry cloth for next use.
NOTE: Do not pour water out until it’s cooling, Hot water will hurt
you and damage the machine itself.
FAQ
Q1. Are you a factory of trading company?
We are professional manufacturer.We are warmly welcome clients from
worldwide to visit our factory and cooperation with us.
Q2. Can I get some samples?
Yes,we are honored to offer you samples of most products.
Q3. Can we print our own brand for the fixtures ?
Of course.We are pleased to be your OEM manufacturer and meet your
OEM requirements
Q4. What’s the Payment?
T/T would be better with quick transfer and few bank fees. You can
also use Western Union and Paypal,Alipay also valid here.
Q5. What certifications does the product get?
CE,RoHS,FCC&ISO9001.Other certification could be made if you
pay for it!
Q6, What is the guarantee period?
1 year,our engineer technology support will be always here!
