1.3L Table Top Timing Ultrasonic Cleaner Stainless Steel Tank
What is ultrasonic?
Ultrasonic energy exists in a liquid as alternate rarefactions and
compressions of the liquid. During rarefaction, small vacuum
cavities are formed which collapse, or implode, during compression.
This continuing rapid process, called cavitation, is responsible
for the scrubbing effect which produces ultrasonic cleaning. Three
factors affecting the scrubbing action are the degree of liquid
degassing, the ultrasonic frequency and the chemical
characteristics of the liquid at specific temperatures.
Degassing is the removal of unwanted air from the liquid, typically
found in fresh tap water. As the cavities form, they fill with the
unwanted air forming bubbles, which resist collapse and tend to
remain suspended in the liquid. These bubbles act as "shock
absorbers," which materially reduce cleaning efficiency.
The amount of air can be reduced by periodically switching off, or
modulating, the sound energy to permit adjacent bubbles to
coalesce, float to the surface, and escape. The type of modulation
is important, for the correct balance between degassing and
cleaning efficiency must be selected for each cleaning application.
Application:
Ultrasonic processors are used as homogenizers, to reduce small
particles in a liquid to improve uniformity and stability.
These particles (disperse phase) can be either solids or liquids.
Ultrasonic homogenizing is very efficient for the reduction of soft
and hard particles.
Laboratory ultrasonic devices can be used for volumes from 1.5mL to
approx. 2L. Ultrasonic industrial devices are used for the process
development and production of batches from 0.5 to approx 2000L or
flow rates from 0.1L to 20m³ per hour.
Ultrasonic Cleaner Details :
| Model Number | DK-130H |
| Tank Size: | 150*140*65mm |
| Overall Size: | 190*170*195mm |
| Capacity: | 1.3L |
| Frequency: | 28/40KHz |
| Ultrasonic Power: | 60W |
| Heating Capacity: | None |
| Time Range: | 0-20min/ Always on |
| Temperature Range: | None |
| Drainage: | None |
Now that you are familiar with basic types of ultrasonic cleaning
solutions you can refine your selection based on the following 5
considerations.
1. What is being cleaned
2. The contaminants to be removed
3. The product configuration
4. What the product is made of
5. Post-cleaning requirements if any
DeKang is the professional manufacturer of ultrasonic cleaner, we are top
3 manufacturer with many years in China.
All of our ultrasonic equipment carries two certifications : CE,
RoHS
We are been Manufacturers and we have factory in Shenzhen . We are
happy to share our experience in cleaning with you, our customer.
Just send an email or call us toll free and we will do all we can
to help
