88 Liter Industrial Heated Ultrasonic Cleaner Assisted Filtration
System
When we need industrial ultrasonic cleaner?
Industrial equipments need an effective industrial cleaning machine
to remove contaminates from the surfaces of parts. Depending on the
industry, these contaminates could include machine oil, casting
sand, metal shavings, polishing compounds or even human skin oil.
To expedite the cleaning process and effectively manage labor
costs, manufacturers typically use an industrial washer rather than
tie up resources to wash components by hand.
DeKang industrial circulating filtration ultrasonic cleaner Cleans
Oil, grease, polishing compound, waxes, cutting fluids, lapping
compound, dirt, swarf, residues, resin, silicones, carbon
deposition, scale, finger prints, solder flux, plating salts,
blood, ink, photoresist, lacquer, paint etc.
ultrasonic cleaner filtration system
SUS 304 stainless steel tank
Industrial grade integrated circuit
0-80ºC temperature range
1-99 minutes working time
Power adjustable
Sparging and circulating filtration function
Dewaxing and degreasing function, degassing is the removal of
unwanted air from the liquid
28KHz for gross rinse or 40KHz for intensive rinse
Auto stand-by, sleep, and wake-up by one key-press mode
Digital controller of high-precision and a long service-life
Specifications
| Model: | 2410M |
| Tank Size: | 550*400*350mm |
| Tank thickness: | 2.5(SUS304/316) |
| Capacity: | 88L |
| Frequency: | 40KHz |
| Ultrasonic Power: | 0-1200W |
| Heating Capacity: | 3000W |
| Timing Range : | 1-99mins |
If you need custom service, please feel free to contact us!
How to use ultrasonic generator?
1.POWER SWITCH
The main power switch of the ultrasonic generator and the
transducers controlled by the
ultrasonic generator.
2.OVERLOAD INDICATOR
When the transducers of the ultrasonic plate or cleaning tank have
a short circuit, the
overload indicator would turn on to remind that the electric
current has exceeded the
right value. In this case, please turn the power switch immediately
and then check the
circuits of transducers.
3.ELECTRIC CURRENT INDICATOR
Generally, the electric current indicator and scan mode indicator
turns on
simultaneously. In this display mode, the electric current is
readable on the LED display
screen.
4.SCAN MODE INDICATOR
Generally, the scan mode indicator turns on at the same time as
electric current
indicator, time setting indicator, or frequency indicator. When the
display mode is
changed to “SCAN”, the LED display screen will display the current
value, set time,
frequency value in circulation. Besides, their indicators also will
turn on accordingly.
5. TIME SETTING INDICATOR
When this indicator turn on with the scan mode indicator at the
same time, the LED
display screen will display the set time or ultrasonic time left.
6.FREQUENCY INDICATOR
When this indicator turn on with the scan mode indicator at the
same time, the LED
display screen will display the ultrasonic frequency.
7.LED DISPLAY SCREEN
It can display different values under different modes.
8.POWER DISPLAY BAR
When the device is on, It can display relevant ultrasonic power
rate when the ultrasonic
power is adjusted by rotating the power control knob.
9.POWER CONTROL KNOB
It can be used to set different ultrasonic power value.
10.DECREASING BUTTON
This button can be used to decrease the ultrasonic time.
11.INCREASING BUTTON
This button can be used to increase the ultrasonic time.
12.MODE SWITCH BUTTON
