3900W large bath Industrial Ultrasonic Cleaner 53L for Microscope
Advantage:
Ultrasonic is widely used throughout industries to remove difficult
contaminants from the parts during or after manufacturing process
which might require a stage of cleaning before the next process. In
general, if an item can be cleaned with liquid, it can be cleaned
much faster and more thoroughly with an ultrasonic cleaner.
Compared with traditional solvent/scrubbing, our ultrasonic
cleaners:
About an order
- there is no MOQ in our factory.
- Could customized the model for you.
- 1year warranty.
- engineer's technology support
- heating and power adjustable
Company Profile
Shenzhen Dekang Cleaning Electronic Appliance Co.,Limited is a
comprehensive new high-tech enterprise which focuses on the
research&development, productction and sale of
household,commercial,laboratorial,industrial high-power ultrasonic
cleaner ect.Especially,we also can customize non-standard products
according to customers'requirements.
Now our products are composed of household ultrasonic
cleaner,mutifunctional aweep ultrasonic cleaner,power adjustable
ulltrasonic cleaners,smart dual-bands ultrasonic cleaner,dihital
ultrasonic cleaner,mechanical ultrasonic cleaner,industrial
ultrasonic cleaner,submersible ultrasonic transducer etc.All of our
standard products have achieverd most internation standards,such as
CE certification,ROHS certification,FCC certification
etc.Besides,Dekang also have strict extramining procedurer for
controlling the quality of non-standard products.
Application
Industrial ultrasonic cleaner are suitable to clean irregular and
complex specialized instruments,components and PCBs of sundry
shops,workshops,factories etc.You could check the comparison from
below picture.
· Jewelry especially gold, silver & platinum
· Watchstraps
· Coins and other collectibles
· PCB Boards etc
· Engine/Model parts
· Toothbrushes & Dentures
· Electrical components
· Make-up cases
· Diesel injection pumps
· Printer heads and toner cartridges
· Motorcycle radiators
· Vehicle differentials
· Milking parlor equipment·
· Golf clubs&grips&golf balls
.Horse bits&stirrups &horse brasses
· Tattoo needles· Surgical equipment
Why you choose us:
- Are more effective at removing contaminants;
- Are quicker to get a good cleaning effect;
- Save labor time of employees (and subsequent labor cost);
- can heat the cleaning solutions to a suitable cleaning temperature
so as to enhance the cleaning efficiency;
- Have a digital controller of high-precision and a long
service-life;· Are of high performance;
- reduce chemicals in the cleaned stuffs;· Are environment friendly
because of its recyclability.
Specification
| Model: | DK-3010D |
| Tank Size(mm): | 550*450*400(L*W*H) |
| Overall Size(mm): | 820*630*850(L*W*H) |
| Capacity: | 99L |
| Frequency(KHz): | 28/40 |
| Ultrasonic Power(W): | 0~1500 |
| Heating Capacity(W): | 3000 |
| Timing Range(min:secs): | 1~99 |
| Temperature Range(℃) | 0~80 |
| Water Drainage | Yes |
Plug
Have many kind of plug,such as:UL,SAA,VDE,JAPAN OLUGE,SABS,THE UK
PLUGE .
Certifications
All Dekang’s standard products have achieved most international
standards, such as CE certification, RoHS certification, FCC
certification etc. Besides, all no-standard products also can
satisfy all requirements of these most international standards.
How to use it
1. Fill the stainless steel tank with cleaning solution; turn the
single phase switch or three phases switch on; After power-on, the
LED display of the temperature displays the actual environmental
temperature; while the LED display of time displays 3 minutes
(default ultrasonic time).
2. Temperature setting: Press “temperature-/temperature+”shortly at a time means time increase/ reduce 1℃ at a time, press
and hold there means time will increase/decrease by 10℃ .
Note: Usually, the best cleaning temperature is within 40℃ to 60℃.
The temperature displayed is the real temperature. The default
value of the temperature is 0℃. When you set temperature, the
heating function can not be started unless the set temperature is
higher than the environmental temperature and the “Heating” button is pressed after the temperature setting. When the real
temperature is higher than the set temperature, the indicator of
heating will turn off. However, the heating function would not be
turned off automatically if the ultrasonic cleaning still works, it
will start again when the water temperature is lower than the set
temperature. In this case, you can only press “Heating” to turn off heating function. However, if the ultrasonic cleaning
time runs out, the heating function will stop automatically.
3. Time setting: Press the “TIME-/ TIME+ ”shortly at a time means time increase/reduce 1min at a time,
press and hold means time will increase/reduce by 10mins
continuously. The cleaning stops when the timer counts down to
00:00. If the unit needs to be stopped before the timer runs up,
press “Ultrasonic” button.
4. After time and temperature setting, press “Ultrasonic” or ”Heating” button to start both functions. Press “Ultrasonic ” or ”Heating” button again, the Ultrasonic or heating function will stop.
5. Power Controller: the power can be adjusted among 0% and 100%.
Users can adjust the power value randomly based on the characters
of the stuffs to be cleaned.
6. “Filter”: the filtration system with a sparger can be started or stopped by
pressing “Filter” button.
Empty the tank and clean both the outside and inside of the cleaner
with a clean and dry cloth for next use.
Express
Include: TNT ,UPS ,EXPRES,FedEx ,EMS ,DHL,Air transportation,Sea.
