Stainless Steel 22L 400W Ultrasonic Blind Cleaning Machine for
Sundry Shops or Workshop
Features:
1. SUS 304 stainless steel tank
2. Industrial grade integrated circuit
3. 0-80ºC temperature range
4. 1-99 minutes working time
5. Dewaxing and degreasing function
6. 28KHz for gross rinse or 40KHz for intensive rinse
7. Auto stand-by, sleep, and wake-up by one key-press mode
8. Digital controller of high-precision and a long service-life
How many parts can be cleaned in a tank?
The total surface area of the work to be cleaned, measured in
square inches, should not be greater than the tank volume, measured
in cubic inches., or about 230 square inches of cleaning area per
gallon of tank capacity. The size of the tank should be such that
when the work is loaded into the basket there are at least 1.5
inches on each side and top and at least 2 inches of liquid on the
bottom free of parts. The design of work fixtures and baskets is
critical to a good cleaning process.
Application
Cleaning Dental and Medical Instruments
Fast pre-sterilization cleaning of Dental and medical instruments.
Ultrasonic cleaners reduce the risk of cross contamination and
infection
Lab Instrument Cleaning
Fast, Quiet, thorough laboratory instrument cleaning. Ideally
suited for the stringent cleaning demands of all types of labware:
glass, plastic, or metal. Also great for sample preparation and
solvent degassing
Remove Particles from Sieves
Thoroughly remove particles from sieves in food, environmental, and
analytical laboratories. We offer special equipment for cleaning
individual sieves or four 8-inch sieves simultaneously.
Carburetor and Automotive Parts Cleaning
Perfect carb and auto parts cleaning. Thoroughly remove carbon
deposits, grease, oil, and other dirt from carburetors and engine
part.
Specification
| Model No | DK-1210R |
| Tank Size(mm) | Φ400*260 |
| Overall Size(mm) | 510*450*560 |
| Frequency(KHz) | 28/40 |
| Volume | 32L |
| Appearance | Barrel |
| Ultrasonic Power(W) | 600 |
| Timing(min) | 1-99 |
| Temp(ºC) | 0-80 |
| Water Drainage | Yes |
How to maintain maintain Ultrasonic Cleaner?
There are several tips and rules to follow when using an ultrasonic
cleaner for getting the best performance possible.
1. Location Locate the cleaner in an area where you have plenty of
room to stage your parts prior to cleaning and where you have room
to stack the clean parts after cleaning. Do not block the generator
airflow as this will overheat the generator and cause a loss of
cleaning action and damage the electronics. If your generator is
separate from the tank make sure that it wont get wet when you are
cleaning parts.
2. Foil Test Get a base line for performance for your new tank;
Even if you cant afford a probe to test and record and ultrasonics
tank performance you can do a simple aluminum foil test to
determine your tanks initial performance and keep this record in a
book to compare to future records. To perform this test you will
need some aluminum foil Note: this test can contaminate a critical
cleaning system DO NOT USE!
DEKANG Ultrasonic Cleaner Company
ShenZhen DeKang Electronic Cleaning Appliance Co.,LTD is a
comprehensive new high-tech enterprise which focuses on the
research & development, producction and sale of commercial,
household, industrial high-power ultrasonic cleaner etc.
Our R&D department can be divided into five sections:
mechanical structure design section, electronic design section,
software developing section, graphic design section, testing
section. All members are excellent engineers who have at least 5
years’ R&D experience
All ultrasonic cleaners through Europe CE, FCC, RoHS, have passed
the ISO quality system authentication, all products are 100%
qualified factory test .
The warrnty period is 1 years from the date of shipment, and we
will be responsible if any quality problems.
