32 Liter Digital Industrial Ultrasonic Blind Cleaning Machine for
Hardware Tool
The ultrasonic energy is created within a liquid by means of
transducers, which convert electrical energy into acoustic energy.
These transducers are similar in function to a radio speaker except
they function at ultrasonic frequencies (40,000 Hz) and transmit
acoustic energy to a liquid rather than to air. The transducers
consist of vibrating elements (piezoelectric disc) bolted between
thick metal plates. The transducers are bonded to the underside of
the tanks containing the cleaning liquid or are encased in
stainless steel for immersion within a liquid. For reliability,
many transducer modules are uniformly distributed over the tank
bottom rather than having a single transducer in the center of the
tank working very hard. An electronic generator energizes the
transducers. The generator transforms the electrical energy from
the wall outlet into a suitable electrical form for efficiently
energizing the transducers at the desired frequencies. All
ultrasonic cleaning systems consist of the four fundamental
components; transducer, generator, container for liquid, and
cleaning liquid. The performance and reliability of the system
depends upon the design and construction of the transducers and
generators. The overall effectiveness of the cleaning is dependent
upon the cleaning liquid. The size of the tank is dependent upon
the size or quantity of the parts being cleaned. The number of
transducers and generators is determined by the tank size. The
choice of cleaning liquid depends upon the parts being cleaned and
contaminant to be removed.
DeKang ultrasonic cleaner Features:
1. SUS 304 stainless steel tank
2. Industrial grade integrated circuit
3. 0-80ºC temperature range
4. 1-99 minutes working time
5. Dewaxing and degreasing function
6. 28KHz for gross rinse or 40KHz for intensive rinse
7. Auto stand-by, sleep, and wake-up by one key-press mode
8. Digital controller of high-precision and a long service-life
How many parts can be cleaned in a tank?
The total surface area of the work to be cleaned, measured in
square inches, should not be greater than the tank volume, measured
in cubic inches., or about 230 square inches of cleaning area per
gallon of tank capacity. The size of the tank should be such that
when the work is loaded into the basket there are at least 1.5
inches on each side and top and at least 2 inches of liquid on the
bottom free of parts. The design of work fixtures and baskets is
critical to a good cleaning process.
Application
Cleaning Dental and Medical Instruments
Fast pre-sterilization cleaning of Dental and medical instruments.
Ultrasonic cleaners reduce the risk of cross contamination and
infection
Lab Instrument Cleaning
Fast, Quiet, thorough laboratory instrument cleaning. Ideally
suited for the stringent cleaning demands of all types of labware:
glass, plastic, or metal. Also great for sample preparation and
solvent degassing
Remove Particles from Sieves
Thoroughly remove particles from sieves in food, environmental, and
analytical laboratories. We offer special equipment for cleaning
individual sieves or four 8-inch sieves simultaneously.
Carburetor and Automotive Parts Cleaning
Perfect carb and auto parts cleaning. Thoroughly remove carbon
deposits, grease, oil, and other dirt from carburetors and engine
part.
Specification
| Model No | DK-1210R |
| Tank Size(mm) | Φ400*260 |
| Overall Size(mm) | 510*450*560 |
| Frequency(KHz) | 28/40 |
| Volume | 32L |
| Appearance | Barrel |
| Ultrasonic Power(W) | 600 |
| Timing(min) | 1-99 |
| Temp(ºC) | 0-80 |
| Water Drainage | Yes |
DEKANG Ultrasonic Cleaner Company
ShenZhen DeKang Electronic Cleaning Appliance Co.,LTD is a
comprehensive new high-tech enterprise which focuses on the
research & development, producction and sale of commercial,
household, industrial high-power ultrasonic cleaner etc.
Our R&D department can be divided into five sections:
mechanical structure design section, electronic design section,
software developing section, graphic design section, testing
section. All members are excellent engineers who have at least 5
years’ R&D experience
All ultrasonic cleaners through Europe CE, FCC, RoHS, have passed
the ISO quality system authentication, all products are 100%
qualified factory test .
The warrnty period is 1 years from the date of shipment, and we
will be responsible if any quality problems.
